[SI-LIST] DC Resistance calculation in 2.5D solver
- From: Tesla <emcesd@xxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 16 May 2012 19:52:11 +0800 (CST)
Hi, Experts
In 2.5 field solver(eg: Sigrity or SIwave), if i want to get DC resistance of
interconnect, i use the two method:
1 Use FEM to calcute from DC to Fmax Hz, use the DC s parameter to get the S
parameter
2 Use IR drop in the analysis to get the DC resistance
but the two method give two different DC resistance value, Which one i should
trust?
Thanks.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
