[SI-LIST] Re: Crosstalk between High power trace and digital signal

  • From: "Ferhat Yaldiz" <ferhat.yaldiz@xxxxxxxxxxxxxx>
  • To: <raja.anand@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
  • Date: Thu, 9 Apr 2009 11:16:32 +0300

Hi Raja,

I suppose below documents help to you for PSpice.
http://w2.cadence.com/appnotes/TransmissionLineApplicationsInPSpice.pdf
http://www.spicemodel.com/technotes/transmissionlines.pdf

You can easily simulate to coupling effect of AC or DC power lines on
transmission line in Allegro SigXP or Hyperlynx or another tools.

Regards,

FERHAT YALDIZ
HARDWARE DESIGN ENG.
TUBITAK



-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of raja.anand@xxxxxxxxx
Sent: Tuesday, April 07, 2009 3:11 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Crosstalk between High power trace and digital signal

Hi,
In the board which i am doing the crosstalk analysis, has 2 traces which  
are running parallel for say, "X" inches. The First trace is a power trace  
which is 28V AC and Max Current on the trace is 2 A, and the proximity  
trace seperated by "S" mils is the signal trace which I am interested in.
Inorder to measure the near and far end crosstalk on the signal trace in  
the frequency domian, How should I model the source and load in PSpice?

Thanks,
RA


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: