[SI-LIST] Re: Cross-hatched reference planes
- From: Jeff Seeger <jseeger@xxxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 03 Apr 2007 12:45:33 -0400
Lee Ritchey wrote:
>
> Unless this is a flex circuit, why would you cross hatch a plane?
Copper balance, venting, and laminate/laminate bonding
can be issues in certain situations.
--
Jeff Seeger Applied CAD Knowledge Inc
Chief Technical Officer Tyngsboro, MA 01879
jseeger "at" appliedcad "dot" com 978 649 9800
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
