Your question fills a good chapter in many of the texts out there such as "Signal Integrity Simplified" Bogatin, "High Speed Digital Design" Johnson, etc. There are also excellent web tutorials. Steve. On 8/17/2011 12:19 AM, rajesh kumar wrote: > Hello SI Gurus, > Please share your thoughts on the relationship between cross > talk and trace length. In general i consider that the spacing between trace > is the main factor that influences cross talk. Still now i assume that 4X > spacing between traces (X is a trace width) is a good way to avoid cross > talk irrespective of the length of trace. Please share your views on this. > > Thanks, > Rajesh > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu