Analog Devices does a nice job of covering the topic of how to isolate your
analog and digital ground planes, as does Henry Ott.
http://www.analog.com/en/analog-dialogue/articles/staying-well-grounded.html
www.hottconsultants.com/techtips/split-gnd-plane.html
Jeff Loyer
Signal Integrity Lead
Amazon Web Services (AWS)
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Lee Ritchey
Sent: Tuesday, November 15, 2016 12:24 PM
To: dbrooks9@xxxxxxxxxxxxxxx; dmarc-noreply@xxxxxxxxxxxxx; si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Caps between "isolated grounds"?
Sometimes I am prompted to cite Bruce Archambeault from IBM on what ground is.
Here is a quote from him.
"Ground is the place where one plants seeds in the spring time in the hope that
come summer one will get a bumper crop of tomatoes."
The reason for Agnd and Dgnd on an IC is to isolate the analog side of the IC
from the digital side for the purpose of isolating the two circuits
inside the package, not outside it. They should share the same ground
plane on the PCB. Having two different grounds on the PCB does not provide any
performance advantage to the IC.
Outside the IC, efforts should be made to insure the analog source does not
share paths with digital signals. We usually do this by using shielded cables
leading to the analog source.
Hope this clears up some of this confusion.
Lee Ritchey
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Doug Brooks
Sent: Tuesday, November 15, 2016 8:33 AM
To: dmarc-noreply@xxxxxxxxxxxxx; si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Caps between "isolated grounds"?
Occasionally some people use a capacitor between different grounds in a
misguided attempt to provide to provide a signal return path under a trace that
crosses over the plane split for signal integrity purposes.
This, of course, is usually a bad idea. The purpose for separate "grounds"
in the first place was to isolate noise. All the capacitor does is ensure the
noise has a path between the two grounds.
(Note to Jeff: Please send me a current email address off-line.)
Doug
Loyer, Jeff wrote:
I was looking at some designs and found different ground symbolsby capacitors. Can anyone explain why this might be done? Everything I've
connected
Thanks,
Jeff Loyer
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
