Hi, I believe many of you SI guys faced the same choice and made your call. I would really appreciate if you can share your experience on these two very different yet both very capable full wave tools, specifically for signal integrity application, i.e, broadband characterization of passive interconnect in most cases. Which one you chose and why and are you happy with your choice ? You can reply me on or off list. Thanks Perry =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20 Perry Qu=20 Design & Qualification, Alcatel-Lucent 600 March Road, Ottawa ON, K2K 2E6, Canada=20 DID: 613-7846720 Fax: 613-5993642=20 Email: perry.qu@xxxxxxxxxxxxxxxxxx=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu