[SI-LIST] Re: CPLD getting blown on board

  • From: <austin@xxxxxxxxxx>
  • To: <hsiuanju@xxxxxxxxxxx>, <weirsi@xxxxxxxxxx>, "'SI-list freelist'" <si-list@xxxxxxxxxxxxx>
  • Date: Fri, 7 Jun 2013 11:25:57 -0700

Hi All,

Possible CMOS Latch-up?

Check this:

http://www.analog.com/library/analogDialogue/archives/35-05/latchup/

Best regards,

Austin

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Hsiuan-ju Hsu
Sent: Friday, June 07, 2013 9:31 AM
To: weirsi@xxxxxxxxxx; SI-list freelist
Subject: [SI-LIST] Re: CPLD getting blown on board

Hi, Sam,
           I had experience about the shut-down last year.
Please follow up the previous suggestions from SI experts and do the last
thing here:
Do Power Integrity simulation for 3.3V core first, then 2.5V. Make sure the
Ztarget is less than 5% below 10MHz.
I think it should help.
Best regards,

Robert Hsu   

> Date: Fri, 7 Jun 2013 08:06:28 -0700
> From: weirsi@xxxxxxxxxx
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: CPLD getting blown on board
> 
> One more item to list to the many good suggestions offered:  Make sure 
> that you don't have a power sequencing problem during shut-down as well 
> as power on.  As it is during power up / power down your device fails, I 
> would go after the power sequencing, VRM overshoot first.
> 
> Steve.
> On 6/7/2013 5:38 AM, Sam Pete wrote:
> > Hi Friends,
> > I am working on a medical board which has multi-core CPU along with
other peripherals.
> > we are getting into some issue that CPLD is getting blown out during
power cycle or sometimes during reset.
> > out of 210 boards we produced, we have 3 boards exhibiting this issue.
The FA report from CPLD vendor says electrical over-stress...
> > The board is not having any hotswap peripherals.... CPLD has 2.5V and
3.3V banks, 3.3V Core/IO supply comes up first then 2.5V.
> > We have gone thru all sorts of checks, negative tests etc., to reproduce
this issue and we were unsuccessful....
> > Does anybody faced similar issues earlier? Appreciate if you can provide
some clues...
> >
> > thanks
> > Sam
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> > or to administer your membership from a web page, go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >
> > List forum  is accessible at:
> >                 http://tech.groups.yahoo.com/group/si-list
> >
> > List archives are viewable at:
> >             http://www.freelists.org/archives/si-list
> >   
> > Old (prior to June 6, 2001) list archives are viewable at:
> >             http://www.qsl.net/wb6tpu
> >    
> >
> >
> 
> 
> -- 
> Steve Weir
> IPBLOX, LLC
> 1580 Grand Point Way
> MS 34689
> Reno, NV  89523-9998
> www.ipblox.com
> 
> (775) 299-4236 Business
> (866) 675-4630 Toll-free
> (707) 780-1951 Fax
> 
> All contents Copyright (c)2013 IPBLOX, LLC.  All Rights Reserved.
> This e-mail may contain confidential material.
> If you are not the intended recipient, please destroy all records
> and notify the sender.
> 
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> 
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> 
> 
> List forum  is accessible at:
>                http://tech.groups.yahoo.com/group/si-list
> 
> List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
>  
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
> 
                                          
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: