Dear Expert In my simulation, there is a big HSPICE netlist. When I run it, the computer tells me that the memory is not enough. Could any expert help me to solve this problem? In the netlist, there are 16000 pieces of inductors and 19200 pieces of resistor. Is it possible to simulate this kind of netlist? Any advice would be helpful. Best Regards Zhangkun 2004.12.30 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu