Forget about simulating the electrical on your capacitors, simulating = how your pins mechanically engage or bounce around will be challenging = enough.=20 -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of steve weir Sent: Monday, April 24, 2006 6:32 PM To: zhang_kun@xxxxxxxxxx; si-list Subject: [SI-LIST] Re: Analysis about hot-plug Zhangkun, it is not a trivial problem. It is affected by the=20 architecture of the power front end, power converters, and the=20 reflected impedance of the load. Many variations are possible. Your capacitor charge time difference is the result of a hard current=20 limit circuit. Steve. At 06:11 PM 4/24/2006, Zhangkun wrote: >Dear all >In one of our products, we are doing some test about hot-plug. There=20 >are two kinds of load for the hot-plug, 100uF and 1000uF. The=20 >phenomenon is interesting: > > 1.The power fall is about same for the two kinds of load. For=20 > instance, the power fall from 3.30V to 3.19V when the load is plug in. > 2.The width of the falling waveform are not same. The width of=20 > the falling waveform for 1000uF is about as ten times as that for = 100uF. > >Has anybody do the similar test or simulation? How to simulate the=20 >hot-plug problem? > >Best Regards > >Zhangkun >2006.4.25 > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > >List technical documents are available at: > http://www.si-list.org > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: =20 //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu =20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu