Folks,=20 I am looking for experiences/comments from people who have used Model = Integrity=20 option within Allegro PCB-SI during IBIS model development. My goal is to build better IBIS models that have been validated using = the same tools used for SI analysis. Please post your experiences good or bad on the following: - Developing IBIS Models using Model Integrity - Validating IBIS Models quality with Model Integrity - Any Model Integrity tool specific issues or limitations. I am trying to decide if incorporating Model Integrity in the overall = IBIS development flow can overcome some of the IBIS quality issues that surface from time to = time. Thanks Rohan=20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu