[SI-LIST] Re: Allegro PCB SI Multi board setup

  • From: Aneesh G <aneesh.govindan@xxxxxxxxx>
  • To: Savita Pethkar <savita@xxxxxxx>
  • Date: Wed, 10 Nov 2010 13:49:55 +0530

I Too agree with Savita...but make sure that your impedance dosen't vary
(Impedance may vary from connector to connector).....If i am right, We are
having an option for this in Hyperlynx...for multi board simulation.... Just
give a try.
On Wed, Nov 10, 2010 at 10:54 AM, Savita Pethkar <savita@xxxxxxx> wrote:

> Hi!
>
>   I don't know whether this helps you.We have done simulation  for XAUI
> Differential links for our backplane to line card.
>
>
> 1.First we made design link between the backplane to line card connectors.
> 2.Then assigned the models to connector (at backplane end only as we
> treated the connector length ie link between two boards is treated as of
> ZERO mil length).
> 3.We assigned models to I/Os on backplane and line card.
> 4.Then we could do the simulation.
>
> savita
> C-DAC,India
>
> On Tue, Nov 9, 2010, narasimha rao <narasimharaopatil@xxxxxxxxx> said:
>
> > Hi,
> > �
> > No, I've not done that.
> > �
> > Regards,
> > Narasimha
> > �
> >
> > --- On Tue, 11/9/10, steve weir <weirsi@xxxxxxxxxx> wrote:
> >
> >
> > From: steve weir <weirsi@xxxxxxxxxx>
> > Subject: [SI-LIST] Re: Allegro PCB SI Multi board setup
> > To: "narasimha rao" <narasimharaopatil@xxxxxxxxx>
> > Cc: si-list@xxxxxxxxxxxxx
> > Date: Tuesday, November 9, 2010, 3:16 PM
> >
> >
> > Have you posted your question to the Cadence user group?� What does your
> > FAE say?
> >
> > Steve.
> > narasimha rao wrote:
> >> Hi All,
> >>�
> >> While working with Multi board simulation, need to connect two designs.
> >> During initialization process it gives an error saying
> >> "Each pin name field must contain one word"
> >> and unable to connect from one design to another design.
> >>�
> >> Can anybody help me in this issue ?
> >>�
> >> Regards,
> >> Narasimha
> >>�
> >>�
> >>
> >>� � ���
> >> ------------------------------------------------------------------
> >> To unsubscribe from si-list:
> >> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >>
> >> or to administer your membership from a web page, go to:
> >> http://www.freelists.org/webpage/si-list
> >>
> >> For help:
> >> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >>
> >>
> >> List technical documents are available at:
> >>� � � � � � � ���http://www.si-list.net
> >>
> >> List archives are viewable at:� ���
> >> ��� ��� http://www.freelists.org/archives/si-list
> >>�
> >> Old (prior to June 6, 2001) list archives are viewable at:
> >>� ��� ��� http://www.qsl.net/wb6tpu
> >>���
> >>
> >>
> >>���
> >
> >
> > --
> > Steve Weir
> > IPBLOX, LLC
> > 150 N. Center St. #211
> > Reno, NV� 89501
> > www.ipblox.com
> >
> > (775) 299-4236 Business
> > (866) 675-4630 Toll-free
> > (707) 780-1951 Fax
> >
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> > or to administer your membership from a web page, go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >
> > List technical documents are available at:
> > � � � � � � � � http://www.si-list.net
> >
> > List archives are viewable at:� ���
> > ��� ��� http://www.freelists.org/archives/si-list
> >
> > Old (prior to June 6, 2001) list archives are viewable at:
> > ��� ��� http://www.qsl.net/wb6tpu
> > �
> >
> >
> >
> >
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> > or to administer your membership from a web page, go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >
> > List technical documents are available at:
> >                 http://www.si-list.net
> >
> > List archives are viewable at:
> >               http://www.freelists.org/archives/si-list
> >
> > Old (prior to June 6, 2001) list archives are viewable at:
> >               http://www.qsl.net/wb6tpu
> >
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
>
> --
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                http://www.si-list.net
>
> List archives are viewable at:
>                http://www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
>                http://www.qsl.net/wb6tpu
>
>
>


-- 
Warm Regards
Aneesh G

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: