[SI-LIST] Allegro PCB SI Multi board setup

  • From: narasimha rao <narasimharaopatil@xxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Tue, 9 Nov 2010 01:39:23 -0800 (PST)

Hi All,
 
While working with Multi board simulation, need to connect two designs.
During initialization process it gives an error saying
"Each pin name field must contain one word"
and unable to connect from one design to another design.
 
Can anybody help me in this issue ?
 
Regards,
Narasimha
 
 

      
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: