Dear all, I've designed a circuit in which the requirement is that each bit of address bus goes to different loads . For Example A0 is connected to 2 loads A1 is connected to 6 loads A2 is connected to 10 loads A3 is connected to 12 loads. so on..... Will this have any impact on the signal integrity of the address buses in the layout. I think the routing lengths will also vary a lot as address bus is driving diffrent loads. Please sugguest the best way to go ahead with the Layout. Thanks and Regards, Venkat _____________________________________________________________ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu