[SI-LIST] About agilent calibration kits
- From: John Smith <swagguy18@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 16 May 2011 14:34:45 -0400
Hi, experts,
I am doing S11 measurements using agilent PNA N5230A. My device under test
is a two-meter SRC cable. In the manual, it suggests me to use 85052B or
85052D calibration kit. But for some reason, in my lab I get only 85032E
calibration kit. Can anyone tell me if I should use it to calibrate my
network analyzer? Will this make my measurement incorrent?
Thanks.
Regards,
John Smith
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
