Because I did not buy PLTS, and I want to try it use matlab or ads. If it is a very complicated job, maybe I will give up. How to split a s-param to half, it is a funny thing.I am interested in it. beginning, I thought it was just a simple matrix operations. But later,I found this approach is not feasible.Now,I have no idea,I hope you give me some advice. 2013/7/1 steve weir <weirsi@xxxxxxxxxx> > It's possible. To do it well is a major effort. It would make a good > senior project in quantitative electromagnetics. Why do you want to > reinvent this wheel? > > Steve. > > On 6/30/2013 11:59 PM, ye tao wrote: > > Hello Experts: > > I know in the PLTS2013£¬have AFR(Automatic Fixture Removal) £¬it is > > better than TRL. > > But, I want to do it in ADS or Matlab environment, is it impossible? > > > > I read some paper, but I can¡¯t find the theory of AFR. The most important > > thing is split the S-parament to half. > > > > I think it need to covert freq domin to time domin,and cut off , then > > covert time domin to freq domin. This way can split the S-parament to > half? > > Is it right? > > > > Who can help me? Thanks > > > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > > > > -- > Steve Weir > IPBLOX, LLC > 1580 Grand Point Way > MS 34689 > Reno, NV 89523-9998 > www.ipblox.com > > (775) 299-4236 Business > (866) 675-4630 Toll-free > (707) 780-1951 Fax > > All contents Copyright (c)2013 IPBLOX, LLC. All Rights Reserved. > This e-mail may contain confidential material. > If you are not the intended recipient, please destroy all records > and notify the sender. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu