[SI-LIST] About XTK layout file transfer issue
- From: "jliou" <jliou6376@xxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 15 Jul 2005 06:19:58 -0000
The problem is when I transfer Allegro layout file *.dat with XTK
command AXXX.exe(version is 2.1.9), it will create to *.isf file
(version is 2.0). After I launch *.isf file with XTK, I found the trace
shift with pad, so it cause the trace is open one by one(discontinue).
I don't know what kind of problem to cause this error, could anyone
give me some hint to solve this problem?
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] About XTK layout file transfer issue
