[SI-LIST] AC coupling Capacitor
- From: <jain.nitin@xxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 25 May 2006 16:33:58 +0530
Hello,
For a gigabit differential pair AC coupling capacitor is used. But what
exactly is the use of AC coupling capacitors? I believe that they are
used when the bias voltage of driver & receiver are different.=0D
Also where exactly AC coupling capacitors should be placed when the
differential trace is running on a backplane from one daughter card to
other (at driver end or at receiver end).
What will happen if two AC coupling caps are used. One at driver side
and other at receiver side.
With regards,
Nitin
The information contained in this electronic message and any attachments to=
this message are intended for the exclusive use of the addressee(s) and=
may contain proprietary, confidential or privileged information. If you=
are not the intended recipient, you should not disseminate, distribute or=
copy this e-mail. Please notify the sender immediately and destroy all=
copies of this message and any attachments.=0D
WARNING: Computer viruses can be transmitted via email. The recipient=
should check this email and any attachments for the presence of viruses.=
The company accepts no liability for any damage caused by any virus=
transmitted by this email.
=0D
www.wipro.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
