[SI-LIST] Re: A question for the group
- From: "Vishram Pandit" <vishrampandit@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 29 Jul 2002 12:59:04 +0000
Mike,
I will be interesting in it.
Vishram Pandit
SI/Compliance Engineer,
Hughes Network Systems
(301)212-7932
>From: "Todd Westerhoff" <twesterh@xxxxxxxxx>
>Reply-To: twesterh@xxxxxxxxx
>To: <si-list@xxxxxxxxxxxxx>
>CC: <MikonConsulting@xxxxxxxxxxxxx>
>Subject: [SI-LIST] Re: A question for the group
>Date: Fri, 26 Jul 2002 17:40:58 -0400
>
>
>Possibly. I think there would a LOT of interest in methods of using
>complex
>SI/EMC tools effectively.
>
>Todd.
>
>Todd Westerhoff
>Signal Integrity Engineer
>Cisco Systems
>250 Apollo Drive - Chelmsford, MA - 01824
>email:twesterh@xxxxxxxxx
>ph: 978-497-0272
>============================================
>
>"Why'd you have to go and make things so complicated?"
>
>- Avril Lavigne
>
>
>-----Original Message-----
>From: si-list-bounce@xxxxxxxxxxxxx
>[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of MikonCons@xxxxxxx
>Sent: Friday, July 26, 2002 5:04 PM
>To: si-list@xxxxxxxxxxxxx
>Cc: MikonConsulting@xxxxxxxxxxxxx
>Subject: [SI-LIST] A question for the group
>
>
>SI Collegues:
>
>I have always tried to stay at the cutting edge of high speed design
>techniques that address EMC and SI problems in a cost-effective manner. I
>have attempted to slow down my consulting activity over the past three
>years
>with an eye on "retirement," but new and exciting tasks have continued to
>whet my appetite and I have fallen prey to their challenges. Therefore, I
>have decided that true retirement is still a few years off.
>
>I am seriously thinking of gathering all my older work and melding it with
>my
>current high-speed work to produce a new tutorial (or two). I would be
>updating the old presentation material (using PowerPoint), adding new
>design
>technique refinements commensurate with the ongoing improvements in
>software
>analysis tools, and including some dynamic simulations/demonstrations (for
>both SI and radiated emissions effects). I have also just completed some
>new
>work in circumventing the exclusive use of Ansoft and H-SPICE, et al, for
>accurate modeling and simulation of multiple coupled T-lines (including
>adjacent layer traces and frequency-dependent losses caused by skin effect
>and dielectric losses). I am considering a paper for DesignCON 2003 on this
>topic.
>
>FINALLY, THE QUESTION: Do you think there is reasonable interest in still
>another "Designing for SI/EMC" tutorial for sale?
>
>Mike
>
>Michael L. Conn
>Owner/Principal Consultant
>Mikon Consulting
>Cell: (408)821-9843
>
> *** Serving Your Needs with Technical Excellence ***
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
