[SI-LIST] Re: 90 degree bend
- From: "Craig Clewell" <cclewell@xxxxxxxxx>
- To: <pcb_user@xxxxxxxxxxx>
- Date: Mon, 30 Aug 2004 07:00:28 -0800
...oh I'm sure you'll get a million responses to this one....
The real reason not to do this is because of the extra capacitance from
the extra width of the trace at the corner when using big fat traces.
This excess capacitance will cause some delay if you have a significant
number of right angle bends. They may also add some skew in
differential routed lines if not routed evenly.
Craig
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of New Bee
Sent: Monday, August 30, 2004 3:49 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] 90 degree bend
Hi
I am a new PCB designer.
I have a silly doubt - really do not know if I ask it in this forum.
why is it suggested not to have 90 degree bends for the traces while
routing ?
If some one can give me the electrical/electronics and manufacturing
reasons I will be greatful to them
If this is not the right forum to address this please let me know where
can I ask
Thanks in advance
Kam
Yahoo! India Matrimony: Find your life partner online.
Yahoo! India Matrimony: Find your life partneronline.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
