Greetings All, Can anyone shed some light on what would be considered a "good" 4 layer stackup? Does anyone have suggestions for reference material I could read? These are the 2 versions we are currently considering. Does anyone know of any pros/cons for these stackups? Sig1/PWR GND PWR Sig2/GND or GND Sig1/PWR Sig2/PWR GND Finally, for a design under 15MHz what is more important: inter-plane capacitance (pwr/gnd distance minimized) or signal/plane distance to be minimized? Thanks, Nic Torchia Domenic (Nic) Torchia Product Engineering Manager NORSCAN Phone (204) 233-9138 ext.40 Fax (204) 233-9188 www.norscan.com Our Mission: "To develop and provide open interface solutions that manage and secure the physical layer of communication networks" ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu