Hi All, It was a long time Question in mind and heard some versions related to the "recessession of Power Plane 20H times inside the Ground plane on the board edges helps reducing Edge Radiations in the Multilayer board" where H is the height of POWER plane above the GND Plane, there were contradicting articles on the question, i want to know fom this forum of experts their views and if any case studies. Thanks Mak Larsen & Toubro Limited www.larsentoubro.com This Email may contain confidential or privileged information for the intended recipient (s). If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu