[ SHOWGSD-L ] Re: Breed Standard-Objective vs Sugjective Faults???
- From: MAJTEACH@xxxxxxx
- To: EKOLAN1@xxxxxxx, Showgsd-l@xxxxxxxxxxxxx
- Date: Sat, 8 Jul 2006 09:22:53 EDT
In a message dated 7/7/2006 4:23:16 P.M. Pacific Standard Time,
EKOLAN1@xxxxxxx writes:
2 Size and proportions [Since we do not measure in the ring]
From the standard:
The desired height for males at the top of the highest point of the shoulder
blade is 24 to 26 inches; and for bitches, 22 to 24 inches.
Size does matter. From the looks of males, especially, you will do better
with one measuring OVER 26". Today, a 26" male looks small.
JMHO
Colette
============================================================================
POST is Copyrighted 2006. All material remains the property of the original
author and of GSD Communication, Inc. NO REPRODUCTIONS or FORWARDS of any kind
are permitted without prior permission of the original author AND of the
Showgsd-l Management. ALL RIGHTS RESERVED.
ALL PERSONS ARE ON NOTICE THAT THE FORWARDING, REPRODUCTION OR USE IN ANY
MANNER OF ANY MATERIAL WHICH APPEARS ON SHOWGSD-L WITHOUT THE EXPRESS
PERMISSION OF ALL PARTIES TO THE POST AND THE LIST MANAGEMENT IS EXPRESSLY
FORBIDDEN, AND IS A VIOLATION OF LAW. VIOLATORS OF THIS PROHIBITION WILL BE
PROSECUTED.
For assistance, please contact the List Management at admin@xxxxxxxxxxxx
VISIT OUR WEBSITE - URL temporarily deleted due to AOL issues
============================================================================
Other related posts:
