[sarcmembers] Re: New Cable Portals at the Clubhouse
- From: george bernard <gbernard@xxxxxxxxx>
- To: john maetta <sarcmembers@xxxxxxxxxxxxx>
- Date: Mon, 15 Jun 2009 11:22:12 -0700
thank you , eric. those were badly needed. george bernard w6nre
> From: wb6fly@xxxxxxxxxxx
> To: sarcmembers@xxxxxxxxxxxxx
> Subject: [sarcmembers] New Cable Portals at the Clubhouse
> Date: Sun, 14 Jun 2009 17:55:42 -0700
>
> With the assistance of Bob W6RFH, Ray AD6LV, and Dave KA6BFB, I used my
> water-cooled core drill to create two additional cable pass-through portals
> in the walls of the Radio Room. One portal is in the outside south wall
> below the right-hand end of the counter, and the other is between the Radio
> Room and the east-side Utility Room, below the left-hand end of the counter.
>
> The pass-through pipes are 2" PVC conduit, with black ABS caps on the
> outside ends. These caps should be gently pushed into place, lest they
> later require a wrench to remove. Force is unnecessary. The pass-through
> on the south wall will preclude the necessity of opening the cable interface
> box, merely to hook up a cable to a temporary antenna outside or on the
> roof. When used for this purpose, some sort of packing material should be
> used to keep flies and rodents from entering.
>
> 73, Eric Lemmon WB6FLY
>
> _______________________________________________
> You have received this because you are subscribed to
> the Satellite Amateur Radio Club Members Mailing List
>
> To post on the mailing list, simply send email to sarcmembers@xxxxxxxxxxxxxx
> This mailing list will
> only accept email from subscribed members so SPAMMERS
> will not get your email address
>
> To unsubscribe, send an email to sarcmembers-request@xxxxxxxxxxxxx with
> 'unsubscribe' in the Subject field OR by logging into the Web interface at:
> //www.freelists.org/cgi-bin/lsg2.cgi
Other related posts:
