Re: Next step.... more guidance requested
- From: Andrew Stuart <andrew.stuart@xxxxxxxxxxxxxxxxxx>
- To: pooka@xxxxxx
- Date: Sun, 14 Jun 2015 08:43:03 +1000
If you used or somehow leveraged "iso", only one block device is currently
supported. It's one of those things which is not hard to fix, but it's hard
to figure out what the best fix is. In any case, I guess the error message
could be bit more obvious. I just put all data under /etc in my
nginx-on-a-stick experiment.
OK I’ve tried again, this time with a single volume. Any further suggestions
for how I can diagnose?
thanks
as
xenif0: Ethernet address 22:00:0a:c5:45:e2
dhcp: xenif0: adding IP address 10.197.69.226/26
dhcp: xenif0: adding route to 10.197.69.192/26
dhcp: xenif0: adding default route via 10.197.69.193
lease time: 86400 seconds
Failed to read device/vbd/832/backend-id.
Abort transaction switching state
bmk_memfree: invalid pointer 0x2666f13a
rumprun: etfs register for "blk1" failed: 5
=== ERROR: _exit(1) called ===
panic: releasing non-pertinent lwp
rump kernel halting...
halted
PANIC: rumpuser panic
port 4 still bound!
minios: halting, reason=0
Other related posts:
