[rollei_list] Re: precautions with cable-release?

  • From: Carlos Manuel Freaza <cmfreaza@xxxxxxxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Mon, 1 May 2006 01:15:08 +0000 (GMT)

A slight correction, the FX could be an F and T model
mix inside, it uses a 2.8 lens and then must be
similar to the F for several parts, in fact the GX/FX
and the late F Aurum and Platin have the same right
lateral panel and the same film spool pressure plate
in the lower film chamber.

All the best
Carlos
 --- Carlos Manuel Freaza <cmfreaza@xxxxxxxxxxxx>
escribió:

> The pistol grip could be useful sometimes, anyway
> you
> can fit the Rolleifix and the cable release again if
> you wish to do it.
> Your FX  basically is almost a classic Rolleiflex
> inside, coud be very similar regarding a T model,
> except for the circuit board on the focusing knob
> side
> and the cables around the viewing lens and the
> infamous device they put around the shutter release
> mechanism to switch on-off the lightmeter. 
> Some years ago I used  my cousin's GX in Brazil and
> shot using a cable release, writing from memory I
> screwed the cable release on the button shutter
> release thread and shot, I have no problems.-
> 
> All the best
> Carlos
>  --- Choiliefan@xxxxxxx escribió:
> 
> > In a message dated 4/30/2006 2:35:10 PM Eastern
> > Standard Time, 
> > chatanooga@xxxxxxxxx writes:
> > I recently bought a rolleifix in haste from e-bay
> > before realising that it 
> > was actually a rolleifix+pistol grip....! Having
> > discarded the pistol bit I now 
> > have a perfectly serviceable cable release too. I
> > use a 2.8fx and will 
> > certainly need a cable release if I'm to justify
> > using a tripod - shutter release 
> > takes quite a push o n this model. All I'm
> concerned
> > about is whether one could 
> > damage the internal shutter mechanism through an
> > over zealous 'step' on the 
> > cable release? Presumably the rollei has some kind
> > of blocking mechanism - and 
> > afterall the unit was designed for a rolleiflex -
> > but there can be no harm 
> > asking. 
> > rgds
> > Chat
> > Can't comment on the robustness of the camera's
> > internal shutter cable 
> > release mechanism but I have found it very
> possible
> > to accidently ruin a frame of 
> > film with cable release since the regular shutter
> > release lock is ineffectual 
> > with the cable.  My experience is with a 2.8F but
> > should be the came on the C 
> > and E3 models.  The FX may be an entirely
> different
> > animal inside.
> > Hope this makes sense...
> > 
> 
> 
> __________________________________________________
> Correo Yahoo!
> Espacio para todos tus mensajes, antivirus y
> antispam ¡gratis! 
> ¡Abrí tu cuenta ya! - http://correo.yahoo.com.ar
> ---
> Rollei List
> 
> - Post to rollei_list@xxxxxxxxxxxxx
> 
> - Subscribe at rollei_list-request@xxxxxxxxxxxxx
> with 'subscribe' 
> in the subject field OR by logging into
> www.freelists.org
> 
> - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx
> with 
> 'unsubscribe' in the subject field OR by logging
> into www.freelists.org
> 
> - Online, searchable archives are available at
> //www.freelists.org/archives/rollei_list
> 
> 


__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis! 
¡Abrí tu cuenta ya! - http://correo.yahoo.com.ar
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' 
in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 
'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list

Other related posts: