At 04:28 PM 4/28/05 -0400, Aaron Reece wrote: > Because that would require time and money Aaron It should take around two hours of time to disassemble the viewing lens and to clean this. It should take around $10 in chemicals to resilver the mirror or, if you wish to have it done by another, roughly $30. This is not rocket science, nor is the process for resilvering completely forgotten. For that matter, you can have it aluminized and this will probably outlast the anticipated lifespan of your grandchildren, though at a marginal drop in reflectivity. I am old-fashioned enough to wish a correction to a condition to be made in an honest-to-Franke-and-Heidecke way. Marc msmall@xxxxxxxxxxxx=20 Cha robh b=E0s fir gun ghr=E0s fir! NEW FAX NUMBER: +540-343-8505 --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list