[rollei_list] Re: missing clamp screw
- From: Don Williams <dwilli10@xxxxxxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Wed, 07 Jun 2006 13:12:39 -0700
At 09:41 AM 6/7/2006 +0100, you wrote:
Mark,
The screw is based on a M3x0.5 x 15 metric cap screw. It has a slightly
larger knurled cap attached and the tip has been pointed. So a 15 or
20mm long cap screw should suffice. They are readily available in
UK/Europe -
John
If you can do whatever it is you want to do by just starting with a
metric screw, just call San Diego Hardware.
Failing that, there is always McMaster-Carr, assuming you are willing
to buy them by the pound.
Don Williams
La Jolla, CA
Other related posts:
