Are you working in the wet darkroom, or the digital one? If the latter, you just do a Crop with the Perspective box checked in Photoshop, and align the sides of the image with the offending verticals. You end up with a square again. This has been a feature of PS for years, & I suppose most other programs have it now. Every camera becomes a view camera this way! Kirk > Subject: [rollei_list] Verticals at edge of frame > From: starboy0@xxxxxxxxxxxxx > Date: Sun, 11 Dec 2011 14:51:17 -0600 > To: rollei_list@xxxxxxxxxxxxx > > I'm noticing that verticals (light poles, edges of buildings) near the edge > of the frame really fall in towards the center with the 80 mm Planar f/2.8 > lens. > > Maybe I wasn't paying as much attention to this convergence when composing > before but this effect did not seemed as pronounced with my previous 35 mm > SLRs. > > Anyway I'm wondering how you deal with this when composing. Just make sure > there are no close strong verticals near the edge? Move them more toward the > center? Back away? Eliminate them altogether? Just accept it? Any tricks > to how you use the viewfinder grid lines to address this? > > Just wondering how you seasoned Rollei TLR vets approach this. > > Also I've noticed there is a dimensionality about the way this lens renders > scenes that is lovely. > > Thanks! > > Bob James > > > > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' > in the subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with > 'unsubscribe' in the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list >