Hello Raid, Hello Sam:
Thiis is the detail about the
cameras repair and cost including labor cost and spare parts prices:(Google
direct translation from German):
1) ROLLEIFLEX SL35 E:
Dismantle the camera, repair the shutter speed dial, adjust, adjust the
light meter, adjust the automatic exposure, release
repair, renew time button, fix self-timer lever catch, renew ground-glass
screen: € 147.17.-
2)ROLLEIFLEX 2,8F:
Light meter repair and partially renewing, rear panel lock repair and
partially renewing, cleaning and general cleaning
Adjustment work, repair lens drive, repair viewfinder hood shaft and
partially renew, repair transport, lift with
Renew connecting rod, renew locking drive spring, replace small parts,
assemble Rolleikin knob: € 579.60
3) ROLLEIFLEX SL66
Repair the drive, replace the rack, align the tooth spiral, overtake the
lock, glue the roller blinds, overtake the magazine,
Renew sliding plates; € 380, 93
SHIPPING: € 65: TOTAL COST IS € 1172.7.
The work is guaranteed for one year. The cost for the SL 66 and 2,8F is a
lot cheaper than if I buy second hand cameras, they would require a CLA
soon anyway.
FFS repaired my VSL3 E (new electronics and new shutter), Rolleiflex 3,5F(
camera refurbishing) and the Rollei 35S (CLA and battery adapter.) They are
working without problems, like new.
This is the FFS link:
http://www.ffs-service.de/
Carlos
PS: BTW, the GX/FX will wait a new chance once again...
2018-03-04 15:14 GMT-03:00 sacsu@xxxxxxx <dmarc-noreply@xxxxxxxxxxxxx>:
Hi Carlos, good luck with your repaired cameras. What is the contact info
for FFS? Like to have website info.
Thanks, Sam Anson
-----Original Message-----
From: Raid Amin <ramin@xxxxxxx>
To: rollei_list <rollei_list@xxxxxxxxxxxxx>
Sent: Sun, Mar 4, 2018 12:31 pm
Subject: [rollei_list] Re: Three Rollei cameras returning to home
Hi Carlos,
I have a 2.8C Xenotar that needs a CLA. What is the typical cost of a CLA
at FFS?
I once had a Rollei SL2000 repaired at FFS for quite some sum, and the
main board crashed again 6 months later.
Raid
