----- Original Message ----- From: Jan Decher
To: rollei_list@xxxxxxxxxxxxx Sent: Tuesday, May 05, 2009 6:32 AM Subject: [rollei_list] Re: Rotting Rollei CasesThis site has some practical advise on camera case re-stitching:
http://pheugo.com/cameras/index.php?page=stitching JanThis is the method I use although I've also used the alternative two needle method shown in his link. Either works. The hardest part is to estimate the length of the thread needed. Too long is OK but if the thread is too short you have to arrange a lock stitch on the first thread and start the other. Its not difficult but can leave a visible knot.
-- Richard Knoppow Los Angeles, CA, USAdickburk@xxxxxxxxxxxxx
--- Rollei List - Post to rollei_list@xxxxxxxxxxxxx- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list