Dear All I shot a roll of Rollei R3 film shortly after it came out. With one roll I tried using a piece of overexposed slide film inside the camera as an IR filter and the results were a failure. I dumped the film in a corner of the darkroom and didn't look at it till today. I picked it up for my daughter to use to practice loading 120 into a developing reel and discovered that the film is delaminating big time. Its separating into three layers, two thin outer layers one on each side, one of which seems to contain the image and a central more rigid transparent layer. Has any one else encountered this? One thing I should stress is that this was not by any manner of means normal film storage conditions. Humidity probably cycles 50-100% and there is probably a significant amount of airborne chemistry from time to time. Any thoughts welcome Larry Cuffe --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list