I have noticed, on just about every Old Standard I have had a chance to look
at, and even on my own two cameras, that the ring surrounding the taking lens
and/or the viewing lens does not protrude from the front plate far enough to
allow pushing the Rolleinar lenses fully onto the ring surrounding the lens. I
assume that if the Rolleinar lenses do not bottom out on the edge of the lens
ring, focus will be incorrect. Am I correct in this assumption?
Both of my cameras do focus correctly, without the Rolleinars. So I assume the
taking and viewing lenses are properly adjusted.
Best,
Wayne---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
