[rollei_list] Re: Rolleicord IV Xenar ...

  • From: CarlosMFreaza <cmfreaza@xxxxxxxxx>
  • To: "rollei_list@xxxxxxxxxxxxx" <rollei_list@xxxxxxxxxxxxx>
  • Date: Sat, 6 Aug 2022 09:06:22 -0300

The Rolleicord IV was in good general condition when I bought it, however
the film transport mechanism did not measure the right spacing between
frames; the number 12 was a half frame; this is the case for this shot, I
did not crop it, it's a half neg ( it's from the same roll regarding the
portrait); the problem was solved after a CLA:

https://flic.kr/p/2nCm4EV

OFF TOPIC: It happened to me again, I only had the cellphone to capture
this scene:
https://flic.kr/p/2nCEe9g

Carlos





El sáb, 30 jul 2022 a las 8:24, CarlosMFreaza (<cmfreaza@xxxxxxxxx>)
escribió:

I had scanned this portrait years ago with my old scanner, I still had an
amateur account in Flickr.
Now I re-scanned the negative with the Epson v700; it was taken with the
Rolleicord IV Xenar at f4, camera handheld, Agfa APX 100 film developed in
Rodinal 1+25:

Alicia, my always remembered wife:
https://flic.kr/p/2nBfnnZ

Carlos

Other related posts: