I think there is something wrong with the shutter ring, the front panel has the hole for the cable release however the shutter ring does not show a link/piece to release the shutter with the cable, the panel hole must coincide with a hole or link/piece in the shutter, I don't see a physical link in the shutter ring coinciding with the front panel hole to release the shutter with a cable, I think something is wrong there. This is a sample about a Compur #1 shutter (the Rolleicord II uses a #00 Compur shutter) where you can see the piece to screw the cable release: http://www.skgrimes.com/compur/synchro/syncrbg/index2.htm Carlos --- El jue 14-ago-08, Neil Purling <neil@xxxxxxxxxxxxxxxxxxx> escribió: > De: Neil Purling <neil@xxxxxxxxxxxxxxxxxxx> > Asunto: [rollei_list] Re: Rolleicord 2 focus knob > Para: rollei_list@xxxxxxxxxxxxx > Fecha: jueves, 14 de agosto de 2008, 5:09 am > Here is an image of the Rolleicord sn 998551 at: > http://i60.photobucket.com/albums/h25/Primus96/Photography/102_0242.jpg > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with > 'subscribe' > in the subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with > 'unsubscribe' in the subject field OR by logging > into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list ____________________________________________________________________________________ ¡Buscá desde tu celular! Yahoo! oneSEARCH ahora está en Claro http://ar.mobile.yahoo.com/onesearch --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list