Hi all,
Wondering if anyone can give me any advice / pointers before I send this in
for $ervice...:
I have a 4560 Magazine - this is the 645 magazine for the Rollei system,
can be mounted to the receiver in either landscape or portrait orientation
- that refuses to mount up to the receiver. On closer inspection, the two
'claws' on the magazine that grab the pins on the receiver are in
retracted, mounted, position and I can't seem to find a way to release
them. The receiver has the magazine release button (which seems to work by
magic, as there is no aparent movement at the magazine interface - so maybe
magnets?), but I can't find any way to get the magazine 'claws' to flip
back to unmounted position. I know the magazine has dismount lockout via
slide position detection, but can't seem to find any way to get the slide
to put the magazine into unmounted mode.
I have a second 4560 that works flawlessly on the receiver, so I know the
problem is definitely with the malfunctioning 4560, and not a receiver
problem. I use these magazines with an XACT-2; have never tried the
receiver on a 6008, etc., but should be the same.
Any help would be greatly appreciated; thanks in advance!
-frank