[rollei_list] Re: Rollei 35 SE - Advice wanted

  • From: John Wild <jwild@xxxxxxxxxxxxxxxxxxxxxx>
  • To: "rollei_list@xxxxxxxxxxxxx" <rollei_list@xxxxxxxxxxxxx>
  • Date: Thu, 11 Feb 2021 08:16:17 +0000

Hi Louis,

If you put the little rewind lever in the rewind position, the wind-on lever 
should be free to rotate and complete its cycle. Possibly someone tried to 
force it at the end of the film.
When you reach the end of the film, the wind lever just stops. Because it has 
not completed its cycle to cock the shutter, the lens cannot be retracted. 
Turning the rewind lever frees the winder mechanism to finish it's cycle and 
cock the shutter and then the lens can be retracted.

John

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: rollei_list-bounce@xxxxxxxxxxxxx <rollei_list-bounce@xxxxxxxxxxxxx> on 
behalf of Louis Smit <dmarc-noreply@xxxxxxxxxxxxx>
Sent: Thursday, February 11, 2021 12:47:14 AM
To: rollei_list@xxxxxxxxxxxxx <rollei_list@xxxxxxxxxxxxx>
Subject: [rollei_list] Re: Rollei 35 SE - Advice wanted

Hello Everybody,

By way of an update, I received the Rollei 35 SE today. Overall I am pleased 
with the condition, the lens is very clean no scratches, the shutter blades are 
clean with no oil or fungus.  I pulled out the lens and rotated it into 
position. The aperture dial works, the speed dial seems to work as well and 
viewfinder is bright and clean. The shutter also look great so no visible 
problems with that.

The problem is the film wind lever will not wind, it moves about 10 mm from the 
body and that is it. I tried everything I could think off but nothing helps.  I 
cannot tell if the light meter is working, putting a battery in makes no 
difference, but I assume that is because the camera is not in a ready mode. So 
I will take it to a local technician for him to take a look. According to him 
this is a common problem and sometimes cannot be repaired due to a lack of 
spares, so will have to see what he says.

All the best,

Louis


On Thursday, February 4, 2021, 09:30:13 AM PST, CarlosMFreaza 
<cmfreaza@xxxxxxxxx> wrote:


A post in October 2020 was my last mention about Harry Fleenor's work on my 
3m5F Planar:

"... I received my 3,5 F repaired by Harry Fleenor and the Planar lens frontal 
group cleaned at Focal Point in Colorado. Harry did a very good job keeping in 
mind the camera condition, I had bought it cheap at a local auction site, Harry 
sent me the camera working fine, very smooth to shoot and to focus. More than a 
decade later, I sent this camera to FFS, Braunschweig,Germany because it needed 
replacement parts for the Compur shutter like the main spring and parts 
replacement for the film transport mechanism; they told me the camera had a 
heavy use in the far past before I bought it. It is one of my preferred Rollei 
TLR cameras today..."
Carlos

El mar, 2 feb 2021 a las 22:18, CarlosMFreaza 
(<cmfreaza@xxxxxxxxx<mailto:cmfreaza@xxxxxxxxx>>) escribió:

El mar, 2 feb 2021 a las 21:20, Hauke Fath 
(<hauke@xxxxxxxxxxxxxxxxxxxxxxxx<mailto:hauke@xxxxxxxxxxxxxxxxxxxxxxxx>>) 
escribió:
"...ISTR Carlos has used another Braunschweig repair shop successfully.

Obviously, sending the camera abroad will incur customs fees as well as
Canada Post's obscene shipping cost and transport time, but you'll know
that better than I.  ;)..."

Hello Hauke:
                  I did not pay customs fees when I sent my cameras to Germany 
because I wrote a note explaining they were old cameras from German origin  and 
they needed replacement parts no longer available in the country (it is true),  
it was the reason I wanted to send them to Germany, that I was only a cameras 
user, not a dealer or a seller. They accepted my explanation and I did not pay 
customs fees; it was not as easy as it sounds BTW, but I comment on the results.
 I'm very satisfied with the FFS work, they did almost a miracle repairing the 
SL66 after the damage it suffered during the returning trip after the first 
repair. FFS overhauled and repaired my SL35E, Voigtländer VSLE 3, Rollei35S, 
Rolleiflex SL 66 and 2,8F and 3,5F, all of which are working fine. Shipping 
costs were reasonable when I sent the cameras to Europe and repair costs were 
not so expensive as you could think, anyway it is an effort, a really 
complicated customs process  to send cameras abroad to repair. the payment is 
also complicated because FFS accepts international money transfers from bank to 
bank only, It's time to enjoy the cameras, the repair stage has finished.

Carlos


Other related posts: