----- Original Message -----
From: "Don Williams" <dwilli10@xxxxxxxxxxxxx>
To: <rollei_list@xxxxxxxxxxxxx>
Sent: Wednesday, August 02, 2006 12:11 PM
Subject: [rollei_list] Old topic-P-51 Main wing spar
At 12:23 PM 7/8/2006 -0500, Harold Stockton wrote:Just make sure the crew has plenty of Coca-Cola in bottles on ice.Don,
I can fully appreciate the shear manpower that it would take to
replicate the P-51's wing spar, as it was made as a sheet-web main
spar and an almost
equally strong rear spar to carry the ailerons and the flaps. Though
simple and cheap to manufacture, repairs were nothing but expensive.
Damaged wing spars meant scraping whole or half wing sections.
I hope this is some help?
Harold
This is an old topic, however I finally got a detailed answer from
Rocky. Anyone who wants a copy of his response please send a note off list.
Regards,
DAW
Don Williams La Jolla, CA
--- Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list