Richard, Unfortunately, I do not have the shears, bending brake, or band saw needed for sheet metal work. But fortunately I work for one of the largest aerospace manufacturing companies in Southern California. Yes, at 77 years of age and a few years of retirement, I am back at work. Jerry Richard Knoppow wrote: > ----- Original Message ----- > From: "Jerry Lehrer" <jerryleh@xxxxxxxxxxx> > To: <rollei_list@xxxxxxxxxxxxx> > Sent: Thursday, September 07, 2006 7:26 PM > Subject: [rollei_list] Re: Jeffrey Smith and Those "Silly > Millimeters" > > > John, > > > > I have a well equipped small machine shop and could make a > > set > > if I needed it. And if I had the plans/ photos usw. > > > > Jerry > > > I envy you for your shop. It must be so nice to be able to > run up some missing thingy at will. Do you also have sheet > metal tools? > > --- > Richard Knoppow > Los Angeles, CA, USA > dickburk@xxxxxxxxxxxxx > > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' > in the subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with > 'unsubscribe' in the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.0.405 / Virus Database: 268.12.2/442 - Release Date: 09/08/2006 --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list