OOPS, I stand corrected, I just scrolled to the bottom of that review and see the latest Z1 does indeed have the lever! What were they thinking??? Jeff On Sat, Apr 5, 2008 at 4:47 PM, Jeff Kelley <jlkphoto@xxxxxxxxx> wrote: > Jim, the B1 was discontinued and the current Arca Swiss replacement is > called the "Z1." The panning lock is a small round knob that has no problem > on any tripod head. Here's a review and photo: * > http://tinyurl.com/3xg2pn* > Jeff > > On Sat, Apr 5, 2008 at 4:35 PM, Jim Brick <jim@xxxxxxxxx> wrote: > > > I have a couple of old B1's. They work great but I hate ball heads. You > > cannot adjust one aspect without screwing-up the other aspect. Try to level > > the horizon but keep the front/back orientation intact! I shoot landscape > > and nature subjects with an SL66. I have used my B1's when necessary over > > the past few decades. Necessary meaning when I need a second tripod/camera > > set-up. My mainstay is an old Gitzo Rationale pan-tilt head. I think that > > the Gitzo G2271M is the best head going. Light weight magnesium. I talked a > > friend into getting one so that I could check it out. Stellar! I'm going to > > get one soon. > > > > http://tinyurl.com/3pbxz7 > > > > New B1 ball heads have a design flaw. The lock for panning action (below > > and left of the main large ball tension knob) is a lever now rather than a > > round knob. The problem is that to unlock panning action, the lever extends > > below the bottom of the ball head so if your tripod head happens to be > > larger than the bottom of the B1, the pan lock lever hits the tripod head > > platform and won't unlock! > > > > If you are locked into a ball head, and still thinking about a B1, > > switch your thoughts to Novoflex. Or RRS. > > > > IMHO, > > > > Jim > > > > > > > > On Apr 5, 2008, at 3:54 PM, Thor Legvold wrote: > > > > > As might have become obvious, I'm taking stock of my current > > > photographic reality, as well as updating old ideas and techniques > > > together > > > with some gear. > > > > > > I'm up to 'tripods' on my list. I have (what I think is) a nice > > > tripod, a Gitzo 'reporter' in enamled aluminium. I bought it new abour 15 > > > years ago and it still works great. It has an offset ball head on it that > > > matches the legs - i.e. not too heavy, not too light. On second thought, > > > it > > > might have been ok for the (relatively lightweight) Bronica, but it may be > > > on the light side for the 6008. > > > > > > Before I run out and buy a B1 (are these still the standard, even > > > today?), I wondered if anyone has any experience with other ball heads. > > > Light is good, as if it's too heavy I'll never bring it along. But it > > > needs > > > to be sturdy enough to support the 6008. I went to the local camera shop > > > and > > > had a look, they have Novoflex and Cullman, but not Arca Swiss. The > > > Magicball idea looks cool, is it usable in practice? Will I notice any > > > significant difference between an Arca Swiss B1 ball and an equivalent > > > Cullman (or even an RRS BH-40)? > > > > > > I might manage without a new head as well, but in order to do that I > > > need some sort of quick release system, as screwing the camera on and off > > > the head isn't going to work in real life more than once before I get fed > > > up > > > and leave the tripod at home. :-) > > > > > > Underneath the 6008 I notice that there's a trapezoidal shaped metal > > > bit with dovetailed edges. Does this camera come with a built in QR plate, > > > or is this for something else? I couldn't find any info in the manual or > > > brochure. From what I can see on the internet, 'everyone' uses Arca Swiss > > > QR > > > system (or the RRS version of the same), and one should choose this. Is > > > this > > > true? Does Rollei have it's own QR system? Does it work? If so, where > > > can I > > > find a matching baseplate to attach to the head? If I can get the QR thing > > > sorted, I can try out the tripod as it is and see if the existing head > > > will > > > be ok, or i I should think about getting a slightly bigger/stronger one. > > > > > > Cheers, > > > Thor > > > > > > --- > > > Rollei List > > > > > > - Post to rollei_list@xxxxxxxxxxxxx > > > > > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'in > > > the subject field OR by logging into www.freelists.org > > > > > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with'unsubscribe' > > > in the subject field OR by logging into www.freelists.org > > > > > > - Online, searchable archives are available at > > > //www.freelists.org/archives/rollei_list > > > > > > > > --- > > Rollei List > > > > - Post to rollei_list@xxxxxxxxxxxxx > > > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'in the > > subject field OR by logging into www.freelists.org > > > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with'unsubscribe' in > > the subject field OR by logging into www.freelists.org > > > > - Online, searchable archives are available at > > //www.freelists.org/archives/rollei_list > > > > >