[rollei_list] Re: Gossen Sixtar

  • From: CarlosMFreaza <cmfreaza@xxxxxxxxx>
  • To: "rollei_list@xxxxxxxxxxxxx" <rollei_list@xxxxxxxxxxxxx>
  • Date: Mon, 14 Feb 2022 16:24:51 -0300

Hi Ferdi:
             I have the Gossen Lunasix F and I also have the Gossen Luna
Pro F, they are identical light meters except for the central plate, the
Lunasix F has blue, silver and black colors and the Luna Pro F a red color,
they are the same light meter with a sbc cell. I first bought the Lunasix F
with the Variable Angle attachment accessory, it allows to change from a
wide angle light measurement  up to a spot measurement, however the Lunasix
F no longer worked suddenly after two months. I liked this light meter very
much and I also had the Variable Angle attachment, I looked for a
replacement and I found the Luna Pro F two years later, it is (like) new
and it works perfectly. I don't use light meters for natural light
outdoors, however I use them indoors and for available artificial light, I
used the Luna Pro F to measure the artificial light for the portrait I
posted yesterday to Flickr.. It is a large lightmeter BTW and I prefer the
Sekonic twinmate or the Gossen Sixtomat sometimes.
Carlos

El lun, 14 feb 2022 a las 10:26, Ferdi Stutterheim (<
dmarc-noreply@xxxxxxxxxxxxx>) escribió:

Hi Carlos,

I believe that one was marketed as Gossen Variosix F in Europe. I had one
too but sold it because I had problems with the battery. The meter was fine
but large indeed. Later it turned out there was nothing wrong with the
meter or the battery. I was just that it came in a soft pouch and when
packed one of the                    buttons was easily presssed, that
turned the meter on and drained the battery. I replaced it for a Sekonic
with a genuine on/off button.

I also have an adaptor to use LR44 (S76) Silver Oxide cells in the Sixtar
or Rollei 35. All S65 cells I had were dead. They do not last as long as
the Mercury cells. The adaptor was made by Frans de Gruyter, also a Rollei
user. It has the shell of a PX625 alkaline cell with a Schottky diode to
bring 1.55 V down to 1.35 V.

Ferdi.

Op 14 feb. 2022, om 13:52 heeft CarlosMFreaza <cmfreaza@xxxxxxxxx> het
volgende geschreven:

Gossen Luna Pro F



Other related posts: