Failure to get through tempts me to be more succint: Are there filters/filter adaptors out there that would allow me to fit a filter on both lens of a bayIII rolleiflex (eg 2.8 gx/fx)? ---------- Forwarded message ---------- From: chatanooga@xxxxxxxxx <chatanooga@xxxxxxxxx> Date: Feb 3, 2006 1:54 PM Subject: filter + lens-cap options on Bay III To: rollei_list@xxxxxxxxxxxxx Hi Listers Thanks to an earlier thread it would seem that a bayonet to series 6 or 49mm adapter would give me some cheaper filter options. However I'd still like to conveniently protect both lenses when I'm finished up - I'd rather not unscrew the adapter and then have to put on the standard twin lens cap. I might add I'm not a fan of the twin cap anyway as I have occasionally flipped up the taking lens half as I 'bagged' the camera. Wondering would one solution be to use a dedicated BAY 3 UV (permanently) on the viewing lense and keep a permanent bay3 _adapter_ on the taking lense? In this way filter change/ lens protection would be a little slicker albeit at the risk of forgetting to take off the (single) lens cap... I guess the big issue though is whether it will be possible to fit both together - looks like it might be a tad tight? rgds