(By the way, why am I still failing fraud detection? I've never been anyone but
who I appear to be.)
________________________________
From: rollei_list-bounce@xxxxxxxxxxxxx <rollei_list-bounce@xxxxxxxxxxxxx> on
behalf of David Stumpp <photos@xxxxxxxxxxxxxxx>
Sent: 17 November 2017 12:59
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] Re: Backing paper bleed
This sender failed our fraud detection checks and may not be who they appear to
be. Learn about spoofing<http://aka.ms/LearnAboutSpoofing>
Feedback<http://aka.ms/SafetyTipsFeedback>
Do you have an example you can show us, John? I've had some odd streaking
problems in the last year with some FP4, and I wonder if yours are the same.
Best wishes,
Dave
________________________________
From: rollei_list-bounce@xxxxxxxxxxxxx <rollei_list-bounce@xxxxxxxxxxxxx> on
behalf of John Wild <jwild@xxxxxxxxxxxxxxxxxxxxxx>
Sent: 17 November 2017 12:53
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] Backing paper bleed
I have a roll of Ilford Delta 400 which has suffered from backing paper
printing bleeding on to the emulsion together with a streaky mottled texture.
Ilford commented that the film was old - coated in 1998 - which could cause
that and that could be amplified if the film had been stored in adverse
conditions. I cannot find any reference to the purchase date - I thought circa
two/three years and it has been kept in a fridge.
I remember that Carlos had a similar problem with T-Max and that his post
referred to a previous post, which I cannot find in the archives. Can anyone
direct me, many thanks.
A reader of Club Rollei User told me he had a similar problem with Foma 200.
Regards
John