----- Original Message ----- From: "CarlosMFreaza" <cmfreaza@xxxxxxxxx>
To: <rollei_list@xxxxxxxxxxxxx> Sent: Monday, June 14, 2010 8:48 PM Subject: [rollei_list] Re: A film developing experience
2010/6/14 Richard Knoppow <dickburk@xxxxxxxxxxxxx>:Too bad you didn't do a clip test. Any film would have done just to see if the developer was still active. Its an economical way to test if you are suspicious of the developer. Even a scrap of printing paper will do.Yes Richard, I thought about it after the facts, the Rodinal looked normal in the bottle; however it had a colour red too much when I was pouring it in the water, I believed it could be some light effect, but I saw a lot of foam when I took the tank lid off after the developing time finished, that foam was not normal, it seemed I mixed some detergent and not developer with the water, but I still had the hope the developer worked anyway, it is the first time I have this problem. BTW, it's horrible to see a transparent fit where you expected to seenew images.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Carlos ---
I once developed a friends film. Mixed up the fixer and developer somehow. You can guess what came out.
-- Richard Knoppow Los Angeles, CA, USAdickburk@xxxxxxxxxxxxx
--- Rollei List - Post to rollei_list@xxxxxxxxxxxxx- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list