[rollei_list] Re: 2,8F Planar and Tmax 400
- From: CarlosMFreaza <cmfreaza@xxxxxxxxx>
- To: <rollei_list@xxxxxxxxxxxxx>
- Date: Sat, 26 Aug 2017 16:21:42 -0300
Thank you Hauke for the comments. Mechanical cameras like the TLR allow to
expose a frame for hours without worries about the battery life.
I did not think the heat could be the cause for the " Watermarks" but I can't
discard it after you mentioned it.. I always try to avoid the heat on the film
but I couldn't assure it didn't receive heat. Anyway, X rays can cause some
strange effects on the film and these slight watermarks are limited to the
first frame only.
Carlos
-----Mensaje original-----
De: "Hauke Fath" <hauke@xxxxxxxxxxxxxxxxxxxxxxxx>
Enviado el: 26/08/2017 14:38
Para: "rollei_list@xxxxxxxxxxxxx" <rollei_list@xxxxxxxxxxxxx>
Asunto: [rollei_list] Re: 2,8F Planar and Tmax 400
On Sat, 26 Aug 2017 09:00:17 -0300, CarlosMFreaza wrote:
Images taken last week end in the farm with the Rolleiflex 2,8 FPlanar,
Kodak Tmax 400, Romek PQ7 1+3 developer:
The Rollei red filter:
https://flic.kr/p/XPtV65
That's a nicely balanced shot, making good use of the square format. I
like it.
Stars trail and the Milky Way:
https://flic.kr/p/XZ4yF9
Nice! An application that TLRs are rarely used for. Again, the square
format works to advantage.
PS: The stars trail photograph shows some slight "watermarks" with the
words "Kodak 2" and "Kodak"; it's evident that X rays printed some film
paper back letters on the film itself. They only affected the first frame.-
Interesting... You are sure the film wasn't exposed to heat?
I see the same effect with a batch of 127 Maco roll films (really
relabeled Efke). They were stored in a larder that tends to heat up to
40°C in summer, and I found them too late. Only suitable for Holga
style photography now, I am afraid.
Cheerio,
hauke
--
Hauke Fath <hauke@xxxxxxxxxxxxxxxxxxxxxxxx>
Ernst-Ludwig-Straße 15
64625 Bensheim
Germany
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
- » [rollei_list] 2,8F Planar and Tmax 400- CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Hauke Fath
- » [rollei_list] Re: 2,8F Planar and Tmax 400 - CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Don Williams
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Peter
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Robert Meier
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Don Williams
- » [rollei_list] Re: 2,8F Planar and Tmax 400- `Richard Knoppow
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Richard Urmonas
- » [rollei_list] Re: 2,8F Planar and Tmax 400- CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- CarlosMFreaza
- » [rollei_list] Re: 2,8F Planar and Tmax 400- Neil Purling
- » [rollei_list] Re: 2,8F Planar and Tmax 400- tom rogers
- » [rollei_list] Re: 2,8F Planar and Tmax 400- CarlosMFreaza