[roc-chat] Re: Tether setups

  • From: Troy Monroe Stacey <tstacey001@xxxxxxxxxxxx>
  • To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>
  • Date: Wed, 13 Jun 2012 19:01:16 -0700

Greg, this is an excellent example of my doodad! Thanks!

Sent from my iPhone

On Jun 13, 2012, at 4:48 PM, Gregory Lyzenga <lyzenga@xxxxxxxxx> wrote:

> 
> On Jun 13, 2012, at 4:10 PM, Jeff Gortatowsky wrote:
> 
>> Think of doing my first 'large' rocket. Large meaning bigger than 4 inches 
>> around.
>> 
>> I have some 6 inch glassed tubing in storage and bought a 6 inch nose cone 
>> from Jack. I want to use DD but using a tether. I figure I'll use a hollow 
>> space in-between two bulkheads near the top of the 'fin can area' for the 
>> electronics with a hatch or hatches for access to the electronics below and 
>> the u-bolt above that the tether latches on to. If that makes sense. 
>> 
>> Anyone have pictures of their tethered setup? 
>> 
> 
> 
> Hi Jeff:
>    This might be too large to be directly relevant, but I've got quite a few 
> pictures of my L3 project setup:
> http://www.physics.hmc.edu/GL/WAC/recov.html
> 
>                    - Greg
> 
> -------------------------------------
> Gregory A. Lyzenga  <lyzenga@xxxxxxx>           ***     (909) 621-8378
> Dept. of Physics, Harvey Mudd College           *** cell(626) 808-5314
> Claremont, CA 91711-5990                        *** fax (909) 621-8887
> <http://tinyurl.com/LyzengaPhysics>
> 
> 
> 
> 

Other related posts: