[roc-chat] Re: Fin Jig for Large Daimeter Airframes - 5.5 inch diameter or larger

From: David Erbas-White <derbas@xxxxxxxxxxxxxxxx>
To: roc-chat@xxxxxxxxxxxxx
Date: Tue, 20 Dec 2011 21:52:47 -0800

On 12/20/2011 9:25 PM, Lesnick, Mike wrote:

Take a look at the Apogee Rocketry website for the guillotine fin jig.It's for smaller rockets, but you could build one up for bigger rocketswithout too much effort.


David Erbas-White

Thanks,  I've seen the BMI fin Jig and see the HPR-1 advertised , but the HPR-1 
seems to be not available.  Does anyone know of a source for the HPR-1 fin jig?

Mike



--
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat

References:
- [roc-chat] Fin Jig for Large Daimeter Airframes - 5.5 inch diameter or larger
  - From: Lesnick, Mike
- [roc-chat] Re: Fin Jig for Large Daimeter Airframes - 5.5 inch diameter or larger
  - From: Lakestake Rocketry
- [roc-chat] Re: Fin Jig for Large Daimeter Airframes - 5.5 inch diameter or larger
  - From: Lesnick, Mike

[roc-chat] Re: Fin Jig for Large Daimeter Airframes - 5.5 inch diameter or larger

Other related posts: