I will be happy to help out. I am flying a 4''Diameter -82.5'' Tall with a 54MM Mount and a 38MM Adapter. Will have a Cesaroni 2 grain motor for a level 1cert (Hopefully) Let me know Terry Burnett From: kramer@xxxxxxxxxxxx To: roc-chat@xxxxxxxxxxxxx Subject: [roc-chat] Adhesive - Temperature - Rocket Needed Date: Tue, 5 Jun 2012 06:15:38 -0700 I'm asked a lot about what adhesives to use for attaching fins. Most people want to use a high temperature adhesive due to heat transfer from the motor. This can lead to other problems since most higher temp adhesives have lower toughness and peel strength. When I ask how hot do they think it will get, no one is quite sure. I want to run an experiment, I have some temperature indicating stickers, we use these at work and they are pretty accurate. I plan to bring some up with me to the lake bed that will show temperatures at 100,150,200,250 degree F. I'm looking for someone with a bigger project where I can put one of the stickers on the motor case, and one on the body next to a fin to see what the real temperatures are. The motor case and the body tube should 'bracket the problem'. I have enough stickers to do 3-4 rockets. Anyone volunteer their rocket for the test? Predictions? Mike Kramer -- ROC-Chat mailing list roc-chat@xxxxxxxxxxxxx //www.freelists.org/list/roc-chat