--- Vecchi Giovanni <gnagnibu@xxxxxxxxx> ha scritto: > trovato: login: root > password: admin > > e dopo un bel ifconfig è tutto come dice Bedo: > > login: root > Password: > > > BusyBox v0.61.pre (2004.06.10-03:48+0000) Built-in > shell (ash) > Enter 'help' for a list of built-in commands. > > # ifconfig > br0 Link encap:Ethernet HWaddr > 00:0F:3D:F5:25:C0 > inet addr:192.168.1.1 > Bcast:192.168.1.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 > Metric:1 > RX packets:838711 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:777805 errors:0 dropped:0 > overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:490861941 (468.1 Mb) TX > bytes:449747542 (428.9 Mb) > > eth0 Link encap:Ethernet HWaddr > 00:0F:3D:F5:25:C0 > UP BROADCAST RUNNING MULTICAST MTU:1500 > Metric:1 > RX packets:838711 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:777805 errors:0 dropped:0 > overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:502603895 (479.3 Mb) TX > bytes:449747542 (428.9 Mb) > Base address:0x2800 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:3 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:3 errors:0 dropped:0 > overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:183 (183.0 b) TX bytes:183 > (183.0 b) > > ... > > ppp0 Link encap:Point-Point Protocol > inet addr:151.38.62.142 > P-t-P:151.6.143.65 Mask:255.255.255.255 > UP POINTOPOINT RUNNING NOARP MULTICAST > MTU:1492 Metric:1 > RX packets:774989 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:835665 errors:0 dropped:0 > overruns:0 carrier:0 > collisions:0 txqueuelen:3 > RX bytes:438760548 (418.4 Mb) TX > bytes:490443883 (467.7 Mb) Fiuuuu tutte le mie conoscenze di reti stavano andando in fumo :) Ciao Bedo ___________________________________ Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB http://mail.yahoo.it