[realmusicians] Re: soundforge 7b setfiles

  • From: "Tom Kingston" <tom.kingston@xxxxxxxxxxx>
  • To: <realmusicians@xxxxxxxxxxxxx>
  • Date: Tue, 6 Oct 2009 11:35:18 -0400

Hey Chris,

I haven't a clue off the top of my head, but I'll try to dig around and see if I can come up with something. I'm working on scripts for 8, 9, and 10. And I don't even have 7 to test on. So I'll take a look at it in 8 and see if I can figure something out.

Regarding the dot net framework? Yeah, that's a nightmare. Don't install any version a program doesn't require. I haven't seen anything yet that requires version 3, but I installed it because Microslop basically forced it in order to get the update for version 2. Then things went crazy until I finally just uninstalled it.


----- Original Message ----- From: "Chris Belle" <cb1963@xxxxxxxxxxxxx>

Hey Tom,
We have a budding window-eyes user my fine student Eddie who is learning to record his libraries of tapes and such just got him a lexicon alpha, a nice simple usb interface for his fast laptop, it's a dual core machine.

I've banged on Doug long enough, I'm re-doing those setfiles to work with 7.

Now I've got a question for you.

And this is reaching way back, so if you can't remember, it's ok, you've probably been to pluto and back twice by now 'grin'.

but you usually follow a very logical programming patern and I see it over and over in these setfiles, hyperactive windows trigering user windows to activate and do a certain action, this is in the plug-in windows.

Now, I saw a departure in the sf7delay.000 setfile, and you referenced something called the delay editor, but the hyperactive window actually triggered something else.

Is there a delay editor ie another section in there where we can do stuff?

Because the actual field which is next is mod rate, and for the life of me, I can't get that hyperactive window to focus on that field, it won't trigger, and I've tried all the tricks.

So far on all the other setfiles, I've had to move windows around a bit, and assign some text strings in hyperactive windows for some controls that just won't talk even when you activate a window around them, this is some of the stuff that got broken between 6.1 and 7 yikes.
So what does the programming master say?

YOu may not even have a way to mess with 7 anymore, but the reason I like 7 is that it doesn't depend on dot net framework, and doesn't have that bug in it with the stopping of loop preview which never worked right on sf8 for me.

And they pulled the rug out from under you with 9 so, we need to get one version really working right atleast, or be chasing our tails forever 'grin'.

Now, back to this mis-behaving field I can't pin down with a hyperactive window in the delay, it's the multi-tap delay window.

I could use a field name, but
you can't do anything with that like activate a window or such.

So any ideas?

In this plug-in the hyperactive window c is triggering the wet out and the very next one is for mod rate. I can see the tag for the mod rate, and usually either lining up the window with twice presses of the f5 and f6 will find the cordinates, or going a bit above and to the left or right depending on whether your defining a top or bottom cordinate can fix the problem but this one won't work.

I can make a user window to track the value of the slider for the mod rate.
But not for the hyperactive window to trigger it.

Help, help 'grin'.

__________ Information from ESET NOD32 Antivirus, version of virus signature database 4484 (20091006) __________

The message was checked by ESET NOD32 Antivirus.


Other related posts: