Gary,
Will do.
Thanks,
Bill
On Sun, Mar 14, 2021 at 9:40 AM poppyscuda <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Bill. Bring your NW 2 switcher. I have a radio antenna for it. Gary
On Mar 14, 2021 9:28 AM, William Robertson <wsrsummer@xxxxxxxxx> wrote:
I will bring some postwar.
Bill R.
On Sat, Mar 13, 2021 at 6:57 PM Peter Condro <pcondro@xxxxxxxxx> wrote:
Looking forward to it!
Peter
On Mar 12, 2021, at 8:47 PM, Thomas Gilsdorf (Redacted sender
"tlg225ccr94" for DMARC) <dmarc-noreply@xxxxxxxxxxxxx> wrote:
Patrick and I have a brochure to put together. Need to shoot pictures and
videos on these layouts.
For the 6x11, if we could please focus on tinplate/postwar.
For the 12x15 two things
Christmas Trains. I plan to bring Polar Express Passenger AND Freight.
Other Christmas trains are more than welcome.
Switchers with smaller scale cars.
Focus on Command Control and we can run at least two trains per loop.
Lower lighting so we can get good pictures and a walk-around video of
the Menards buildings.
Gilly
-----Original Message-----
From: Peter Condro <pcondro@xxxxxxxxx>
To: rc3r@xxxxxxxxxxxxx
Sent: Fri, Mar 12, 2021 11:57 am
Subject: [rc3r] Work Day 3/12/20/ Run session 3/20
Thank you to everyone who participated.
The electrical problem is now diagnosed and will entail more repair…..a
new power cord needs to be built. Rick and tom are on this.
Ken lead the ballast refresh group……we are going to do the front end
(Station module side 1st). I will be ordering ballast and surfactant.
Tom also reset the circuit breakers on the 6x11 and worked on the raffle
layout.
Next work day is Wednesday morning at 0800….we’re going to pull up the
ballast where it needs to be redone.
I want to announce a run session for club members next Saturday the
20th…..8-12 at the storefront……But only with the 12x15 and the 6x11…..
While trains are being run other projects can be accomplished on the large
layout.
Peter
